Re: Re: Rear seat belts
Hi
I did this a few years ago to my series 3 Dormobile,i used Securon inertia seat belts the ones with that have a webbed stalk so you don’t trip over the thing when not in use, drill through the floor and catch the lip of one of the steel rear floor supports there is one which is located just in line with the seat back.The reel is fixed to the B post where it slopes up opposite the corner of the rear seat,to fit the top part you have to remove the metal trim panel where your shoulder would be and fit an L shaped or similar steel brace, (this is a Land Rover part) and drill two holes in the roof gutter for two bolts and slide a plate with two nuts tacked onto it inside the body side.
You then re fit the Dormobile trim panel obviously with a 7/16th size hole so you can fit the top anchor bolt.
regards
Malcolm
