Re: Re: New SIIA Dormobile – help please!
Hi John,
welcome from me as well.
I now have 4 Securon retractable shoulder seatbelts.
Here is my rear installation, which I finished this month. The reel is bolted through the wing reinforcement channel, with bumper washers to spread the pressure. (Ignore the buckle in the first photo; it’s just sitting there on the wing and not installed). The buckles were mounted to the floor in the previous life of this rear tub (10-seater fire department vehicle) and their bolts go through a huge chunk of angle iron running transversely under the floor (it must weigh 10 kg). I used 12mm high-strength bolts throughout. But these seatbelts are not attached to the chassis, so their security is limited, I suppose. I always drive as if I were riding a bike.
I re-made all the interior trim panels because my originals have water damage and are all warped and mouldy. I will have to modify the piece that fits here, but it turns out to only need a small cut.
-Jeremy[attachment=3:1g1qgdsq]seatbelt01.jpg[/attachment:1g1qgdsq][attachment=2:1g1qgdsq]seatbelt02.jpg[/attachment:1g1qgdsq][attachment=1:1g1qgdsq]seatbelt03.jpg[/attachment:1g1qgdsq][attachment=0:1g1qgdsq]seatbelt04.jpg[/attachment:1g1qgdsq]
